Locate the button
The button is located on the side of the SensePlug.
Power on the SensePlug while holding the button down
- Remove the SensePlug from the power socket
- Press and hold the button down
- Insert the SensePlug in the power socket
- Hold the button down for more than 5 seconds until the LED changes from increasing rapid blinking to slow blinking in blue
Verify that the SensePlug has reset
- Power off the SensePlug and wait for a couple of seconds
- Power it back on
The SensePlug LED should be slowly pulsing in blue indicating that it has been reset to factory settings. If it's not the case, go through the factory reset procedure again.