Arming your system
To arm your system, enter a valid PIN code and press Arm (Away) or Arm (Stay)
buttons.
- If you have an Exit Delay set up, your Alarm Pod will beep to indicate that the system is about to arm.
- Once the system is fully armed, the LED on your Keypad will turn green.
Disarming your system
When you enter your place, if you have an Entry Delay set up, your Alarm Pod will beep to remind you to disarm the system before an intrusion is detected.
To disarm your system:
- Enter a valid PIN code and press Disarm
button.
- Once the system is disarmed, the LED on your Keypad will turn green.
Sending an SOS alert
If you need to trigger an SOS alert, press and hold the SOS button for 2 seconds.
- The LED on your Keypad will turn red.
- A notification will be sent to all users associated with your place.