To manually reset a contact sensor, you have to locate its reset button on the top and press it for 10 seconds. After 10 seconds, stop pressing the top button.
1. Locate the reset button
For contact sensor, the reset button is located on the top of the main part of the sensor and is also used to indicate other status. Clicking on the button reports different thing based on the status of the contact sensor. Make sure that the LED respond when you short press the top button, which indicates that the sensor's battery has sufficient capacity.
2. Press and hold the reset button for 10 seconds
Hold the reset button.
3. All done
Please note that reset nami contact sensor do not go into pairing mode straight away. In order for the device to enter pairing mode, you have to short-press the top button once the reset procedure is done. If after a short-press the LED is not pulsing blue, it means that the reset of the device was not completed.
If you encounter any issues during the contact sensor reset process or need further assistance, feel free to explore our comprehensive knowledge base or reach out to our dedicated support team. We're here to help you every step of the way!